Energy Inventions News Articles

Excerpts of key news articles on

Below are key excerpts of revealing news articles on energy inventions from reliable news media sources. If any link fails to function, a paywall blocks full access, or the article is no longer available, try these digital tools.

For further exploration, delve into our Energy Information Center.

Note: Explore our full index to revealing excerpts of key major media news articles on dozens of engaging topics. And read excerpts from 20 of the most revealing news articles ever published.

British researchers believe that they have made a groundbreaking scientific discovery after apparently managing to "create" energy from hydrogen atoms. In results independently verified at Bristol University, a team from Gardner Watts - an environmental technology company - show a "thermal energy cell" which appears to produce hundreds of times more energy than that put into it. If the findings are correct and can be reproduced on a commercial scale, the thermal energy cell could become a feature of every home, heating water for a fraction of the cost and cutting fuel bills by at least 90 per cent. The makers of the cell, which passes an electric current through a liquid between two electrodes, admit that they cannot explain precisely how the invention works. "What we are saying is that the device seems to tap into another, previously unrecognised source of energy." The cell is the product of research into the fundamental properties of hydrogen, the most common element in the universe. Hydrogen can exist in a so-called metastable state that harbours a potential source of extra energy. [Quantum] theory suggests that if electricity were passed into a mixture of water and a chemical catalyst, the extra energy would be released in the form of heat. After some experimentation, the team found that a small amount of electricity passed through a mixture of water and potassium carbonate - potash - released an astonishing amount of energy. "It generates a lot of heat in a very small volume," said Christopher Eccles, the chief scientist at Gardner Watts. The findings of the Gardner Watts team were tested by Dr Jason Riley of Bristol University, who found energy gains of between three and 26 times what had been put in.

Note: For an abundance of reliable reports on amazing new energy developments, click here.

Plants take in carbon dioxide, water, and sunshine to create a sugary fuel. Now researchers have done the same, but even better. A recent study in Science describes the system, named Bionic Leaf 2.0. In the “leaf,” solar energy splits up a water molecule, and bacteria turn hydrogen and carbon dioxide into liquid fuel, mainly isopropanol. The fuel could possibly be used to power a car's engine or motor in the future. The researchers, led by Daniel Nocera and Pamela Silver from Harvard University, have made advancements on their original Bionic Leaf, released last year. The system had some problems, mainly with the metal catalyst that helped the reaction. In the first edition, the catalyst also set off a reaction that attacked the bacteria’s DNA. The new system has a new catalyst made of cobalt and phosphorus. This solves the bacteria-attacking problem and also increases the efficiency of the reaction to 10 percent efficiency. Normal photosynthesis in plants is one percent efficient at converting solar energy to biomass. This technology has the potential to bring another type of solar energy to users. Nocera said in a press release that they are continuing their research, chiefly on bringing this technology to the developing world.

Note: Explore a treasure trove of concise summaries of incredibly inspiring news articles which will inspire you to make a difference.

As if the images of this MSV Explorer prototype amphibious vehicle weren’t arresting enough, Cornish inventor Chris Garner claims to have solved the centuries-old conundrum of perpetual motion – which could lead to electric cars that never have to be recharged. Garner ... is utterly convinced that what he’s come up with will work, saying he’s spent “35,000 hours of science” on the project so far. It’s called the “hyper performance gyro generator”, and he doesn’t just want us to take his word for it – instead he’s having it tested ... at the University of Plymouth next week. Garner prefers to call it “self-sustaining energy”. He explained that the “gyro gen” functions on the principle that it can go from 1rpm to 6,000rpm with very little in the way of friction or drag. Once spinning it won’t stop until it wears out. If the resulting ampage ... is higher than that required to power an electric motor then you’ve got free fuel for travel. In the example currently under development, the gyro gen produces 1,600 amps, far more than the 400 amps required to drive a pair of motors. The remaining electrical energy could then be used to power ancilliaries, such as air conditioning, lights and so forth. Whether it all works in reality remains to be seen – we’ll have a better idea after the tests next week – but it could mean a future free from electric vehicle range anxiety for all of us.

Note: To get the full story on this, click on the MSN link above and then click through the 14 slides of the vehicle there. For lots more great information on this exciting new technology, click here.

Think of the pickup truck from Via Motors as an electric generator on wheels. The truck, unveiled [on January 10] at the North American International Auto Show in Detroit, runs on electricity. But it also can supply electricity - enough to power whole houses. PG&E has been testing two of the pickups since 2010. The trucks could respond to small power outages, temporarily supplying electricity to blacked-out homes. The trucks can supply a maximum of 15 kilowatts of electricity at any given moment - more than the typical house requires. PG&E field workers also could use the pickups to run their power tools. Many of the electric cars now hitting the market are small passenger vehicles, made for commuters. Via, however, targets the other end of the size spectrum. The company, based in the Detroit suburbs, has focused on electrifying large vehicles: trucks, SUVs and vans. Each Via truck has saved PG&E about $2,700 per year in fuel costs, when compared with a conventional pickup. The utility has about 3,500 similar vehicles in its fleet, and converting all of them would save PG&E about $9.5 million each year.

Note: For exciting reports from reliable sources on promising new automotive and energy inventions, click here.

David Sandalow, the Energy Department's assistant secretary for policy and international affairs, practices what he preaches when it comes to alternative-energy vehicles. Sandalow drives a Toyota Prius converted to a plug-in electric for his 5-mile commute to work every day. He recharges at night in the carport of his Washington home. Sandalow's Prius, which was converted two years ago to allow him to recharge the battery from an electric outlet, gets more than 80 miles per gallon and lets him drive 30 miles on a single charge. He can drive up to 30 miles on a single charge, only has to fill the gas tank about twice a month, and he figures he gets about 80 miles a gallon. Including the six-hour electric plug-in a day, it works out to about 75 cents per gallon of gas. His aftermarket conversion cost about $9,000, on top of the price of the Prius. Sandalow wrote the 2007 book Freedom From Oil, and he thinks that hybrids and plug-ins are the quickest way for the country to lessen its dependence on foreign oil.

Note: For key reports from reliable sources on exciting new developments in automotive design and new energy technologies, click here.

Matt Reynolds, an assistant professor in the electrical and computer engineering department at Duke University, wears other hats, too — including that of co-founder of two companies. These days, his interest is in a real hat now in prototype: a hard hat with a tiny microprocessor and beeper that sound a warning when dangerous equipment is nearby on a construction site. What’s unusual, however, is that the hat’s beeper and microprocessor work without batteries. They use so little power that they can harvest all they need from radio waves in the air. The waves come from wireless network transmitters on backhoes and bulldozers, installed to keep track of their locations. The microprocessor monitors the strength and direction of the radio signal from the construction equipment to determine if the hat’s wearer is too close. Dr. Reynolds designed this low-power hat, called the SmartHat, with Jochen Teizer, an assistant professor in the school of civil and environmental engineering at Georgia Tech. They are among several people devising devices and systems that consume so little power that it can be drawn from ambient radio waves, reducing or even eliminating the need for batteries. Their work has been funded in part by the National Science Foundation.

Note: For exciting reports on new energy developments, click here.

Don't dismiss the Nano as a small, poor man's car that will cause a mere ripple on the world market. The Nano is a radical innovation, with the potential to revolutionize automobile manufacturing and distribution. The tiny Nano incorporates three innovations, which together make it huge. First, the Nano uses a modular design that enables a knowledgeable mechanic to assemble the car in a workshop. Thus, Tata can outsource assembly to independent workshops that can then assemble the car on buyers' orders. This innovation not only removes costly labor from the manufacturer's side but also allows for distributed entrepreneurship on the dealer's side. Second, the low cost of the Nano comes from a combination of its no-frills design and its use of numerous lighter components, from simple door handles and bulbs to the transmission and engine parts. The lighter vehicle enables a more energy-efficient engine that gets 67 miles to the gallon. Third, at just 122 inches long, the Nano is one of the shortest four-passenger cars on the market, yet it allows for ample interior space. These innovations have enabled Tata to introduce the Nano at a base price of $2,000. The low price has triggered worldwide interest in the car and a surge of orders, even in a struggling auto market. The Nano has the potential of flourishing despite the recession or softening its sting because of its extraordinary low price. It's a radical innovation precisely because it is a poor man's car.

Note: For a treasure trove of inspiring developments in new energy and automotive technologies, click here.

In the garage of his house, Frank Sanns spends nights tinkering with one of his prized possessions: a working nuclear-fusion reactor. Mr. Sanns, 51 years old, is part of a small subculture of gearheads, amateur physicists and science-fiction fans who are trying to build fusion reactors in their basements, backyards and home laboratories. Mr. Sanns ... believes he's on track to make fusion a viable power source. "I'm a dreamer," he says. Many of these hobbyists call themselves "fusioneers," and have formed a loosely knit community that numbers more than 100 world-wide. Getting into their elite "Neutron Club" requires building a tabletop reactor that successfully fuses hydrogen isotopes and glows like a miniature star. Only 42 have qualified; some have T-shirts that read "Fusion -- been there...done that." Called fusors and based on a 1960s design first developed by Philo T. Farnsworth, an inventor of television, the reactors are typically small steel spheres with wires and tubes sticking out and a glass window for looking inside. But they won't be powering homes anytime soon -- for now, fusors use far more energy than they produce. But the allure is strong. A fusion power plant would likely be fueled by deuterium and tritium, both isotopes of hydrogen that are in plentiful supply. Fusion advocates say reactors would be relatively clean, generating virtually no air pollution and little long-lived radioactive waste. Today's nuclear power plants, in contrast, are fission-based, meaning they split atoms and create a highly radioactive waste that can take millennia to decompose.

Note: How strange that this article seems to accept table-top nuclear fusion as a fact, when mainstream science supposedly debunked this possibility two decades ago. For lots more on infinite energy posibilities, click here.

The Tesla Roadster, which recently entered production, is probably the best known electric car in America. The company's president has called it "the only production electric car for sale in the United States." There are several other electric car companies that would differ with him on that point, but those other vehicles are either limited to speeds below 25 miles per hour or have fewer than four wheels, making their status as "cars" somewhat debatable. With a full set of wheels and a claimed top speed of 125 mph, there's no question this two-seat convertible is a real car. Tesla also boasts an amazing 220-mile range on a full charge as measured in EPA fuel economy tests. Meanwhile, the charging time claimed by Tesla is less than half that of other electric vehicles, thanks to advanced lithium-ion batteries -- which do account for much of the car's high cost. But even gasoline-powered two-seat soft-tops are luxury toys, not daily drivers. Tesla promises it is working hard on a more moderately priced four-door model for driving's other half. The GEM car, from Chrysler's Global Electric Motorcars division, is more typical of what's available to today's average consumer. It's a small, lightweight vehicle that can go up to 25 mph. It can go just a little faster on a downhill grade, but the electric motor automatically steps in to slow it down. The 25 mph top speed is a matter of law, not engineering. "Low Speed Vehicles" (LSVs) like the GEM don't have to meet the same safety requirements as faster cars. But 25 mph is still adequate for many daily commutes and around-the-town errands.

Note: For many exciting reports on new automotive and energy developments, click here.

As California utilities scramble to buy more renewable energy, Pacific Gas and Electric Co. and a Palo Alto startup will announce plans today to build a solar power plant big enough to light more than 132,000 homes. Ausra Inc. will design and build the plant, which will be located on the Carrizo Plain of eastern San Luis Obispo County and could begin operating as soon as 2010. San Francisco's PG&E has agreed to buy the plant's power for 20 years. Like the rest of California's big utilities, PG&E faces a state-imposed deadline to derive 20 percent of its power from certain renewable sources by the end of 2010. So the company is turning to solar thermal power plants, which can generate large amounts of energy on a reliable basis. In July, the company agreed to buy power from a solar plant planned for the Southern California desert, which will generate 553 megawatts, enough for more than 414,000 homes. PG&E plans to buy 1,000 megawatts of solar thermal energy within the next five years. "Solar works best when it's really hot, and that's when we need a lot of power," said Peter Darbee, the utility's chief executive officer. "So solar is something we're exploring more." Solar thermal plants do not use the solar cells that more Californians are bolting to their rooftops. Instead, they use the sun's energy to heat liquids that turn turbines and generate power. Ausra's technology uses flat mirrors that focus sunlight on tubes carrying water, which then turns to steam. The plants can produce far more electricity than silicon solar cells provide and at a far lower price. Ralph Cavanagh, with the Natural Resources Defense Council, said he's pleased to see the recent attention on solar thermal plants. "They're a very good idea for California, and they're also a really good idea for the world," said Cavanagh, director of the environmental group's energy program. "This is one of the scalable solutions that can make a big difference."

Note: For more inspiring reports of new renewable energy developments, click here.

A Purdue University engineer and National Medal of Technology winner says he's ready and able to start a revolution in clean energy. Professor Jerry Woodall and students have invented a way to use an aluminum alloy to extract hydrogen from water — a process that he thinks could replace gasoline as well as its pollutants and emissions tied to global warming. But Woodall says there's one big hitch: "Egos" at the U.S. Department of Energy, a key funding source for energy research, "are holding up the revolution. The hydrogen is generated on demand, so you only produce as much as you need when you need it," he said in a statement released by Purdue this week. So instead of having to fill up at a station, hydrogen would be made inside vehicles in tanks about the same size as today's gasoline tanks. An internal reaction in those tanks would create hydrogen from water and 350 pounds worth of special pellets. The hydrogen would then power an internal combustion engine or a fuel cell stack. "It's a simple matter to convert ordinary internal combustion engines to run on hydrogen," Woodall said. "All you have to do is replace the gasoline fuel injector with a hydrogen injector." "The egos of program managers at DOE are holding up the revolution," he told MSNBC.com. "Remember that Einstein was a patent examiner and had no funding for his 1905 miracle year," Woodall added. "He did it on his own time. If he had been a professor at a university in the U.S. today and put in a proposal to develop the theory of special relativity it would have been summarily rejected."

Note: For a treasure trove of reliable information on clean, new energy sources, click here.

Many respected engineers have been trying for years to bring a compressed air car to market, believing strongly that compressed air can power a viable "zero pollution" car. Now the first commercial compressed air car is on the verge of production and beginning to attract a lot of attention, and with a recently signed partnership with Tata, India's largest automotive manufacturer, the prospects of very cost-effective mass production are now a distinct possibility. The MiniC.A.T is a simple, light urban car. How does it work? 90m3 of compressed air is stored in fibre tanks. The expansion of this air pushes the pistons and creates movement. It is incredibly cost-efficient to run – according to the designers, it costs less than one Euro per 100Km (about a tenth that of a petrol car). Its mileage is about double that of the most advanced electric car (200 to 300 km or 10 hours of driving), a factor which makes a perfect choice in cities where the 80% of motorists drive at less than 60Km. The car has a top speed of 68 mph. Refilling the car will ... take place at adapted petrol stations to administer compressed air. In two or three minutes, and at a cost of approximately [US$2] the car will be ready to go another 200-300 kilometres. As a viable alternative, the car carries a small compressor which can ... refill the tank in 3-4 hours. At the moment, four models have been made: a car, a taxi (5 passengers), a Pick-Up truck and a van. The final selling price will be approximately [US$11,000]. "Moteur Development International" (MDI) ... has researched and developed the Air Car over 10 years.

Note: Why aren't U.S. automakers interested in this breakthrough technology? For abundance of reliable information on the exciting new developments in auto design for super-efficient mileage, click here.

The tangle of cables and plugs needed to recharge today's electronic gadgets could soon be a thing of the past. US researchers have outlined a relatively simple system that could deliver power to devices such as laptop computers or MP3 players without wires. The concept exploits century-old physics and could work over distances of many metres. Although the team has not built and tested a system, computer models and mathematics suggest it will work. "Resonance" [is] a phenomenon that causes an object to vibrate when energy of a certain frequency is applied. "When you have two resonant objects of the same frequency they tend to couple very strongly," Professor Soljacic [explained]. Resonance can be seen in musical instruments. "When you play a tune on one, then another instrument with the same acoustic resonance will pick up that tune, it will visibly vibrate," he said. Instead of using acoustic vibrations, the team's system exploits the resonance of electromagnetic waves. Electromagnetic radiation includes radio waves, infrared and X-rays. The team from MIT is not the first group to suggest wireless energy transfer. Nineteenth-century physicist and engineer Nikola Tesla experimented with long-range wireless energy transfer, but his most ambitious attempt - the 29m [it was actually 187 feet] high aerial known as Wardenclyffe Tower, in New York - failed when he ran out of money. A UK company called Splashpower has also designed wireless recharging pads onto which gadget lovers can directly place their phones and MP3 players to recharge them.

Note: What the article fails to mention is that Tesla's experiments previous to the 1903 Wardenclyffe tower were quite successful, so much so that J.P. Morgan was willing to pour huge amounts into the tower. When he learned, however, that Tesla's intention was to make energy available free to the public, he pulled the plug on the project and many of Tesla's amazing inventions were buried and erased from the history books. For verification, click here and here. For lots more on suppressed energy inventions, click here.

Over a period of 30 years, highly qualified Perth-based surgeon Dr John Holt has had some startling successes with a radio-wave therapy treatment for cancer patients. Dr Holt's controversial treatment works, in layperson's terms, by giving the patient an injection of a glucose-blocking agent. He then shines "radio waves" into the body at a specific frequency. Dr Holt doesn't guarantee it will cure every cancer, but it's not expensive and there's no quackery about it. Born in Bristol 80 years ago and a member of the Royal Colleges, Dr Holt has 26 medical letters after his name. For more than a decade he was in charge of Western Australia's main cancer institute, until the late '70s, when he was blacklisted by his medical colleagues and politicians. The polarisation of the medical and scientific community in Perth over Dr Holt's treatment has been evident since the mid-'70s. While the medical community continues to argue the merits of Dr Holt's unorthodox measures, the families of his successes feel they owe everything to this gentle man. After two brain tumours and a tumour on her spine, Sophia Rosa was sent by pre-eminent brain surgeon Dr Charlie Teo for the radical treatment. Two years later, the only sign Sophia had cancer are the side-effects from the massive doses of chemotherapy given in Sydney.

Note: If the above link fails, click here. For more on Dr. Holt's work, click here. For the story of Royal Rife, another famed scientist who suffered dearly for finding a cure for cancer, click here.

Scientists at Michigan State University announced this week the creation of a “transparent luminescent solar concentrator” that could turn windows and even cellphone screens into solar-power generators. The material works by absorbing light in the invisible spectrum (ultraviolet and near infrared) and then re-emitting it in the infrared. The infrared light is then channeled to the edge of the clear surface, where thin strips of photovoltaic cells generate the power. Because we cannot see infrared or ultraviolet light, the material remains transparent even while concentrating sunlight. Previous luminescent solar concentrators have been developed, but they emitted light in the visible spectrum, creating a stained-glass effect. “No one wants to sit behind colored glass,” Richard Lunt, who leads the lab researching this new technology, said. The new technology is promising, but needs to be made more efficient. Researchers say that the solar conversion efficiency is around one percent. Ideally, this could be increased to more than five percent. Luminescent solar concentrators are less efficient than traditional photovoltaics, which absorb a larger range of wavelengths, but they could allow energy harvesting on surfaces that would otherwise never be used to generate power. The transparent technology could be used in a variety of applications, Lunt said, and its affordability means it has the potential for eventual commercial or industrial use. “Ultimately we want to make solar harvesting surfaces that you do not even know are there,” he said. The researchers' findings were published in the journal Advanced Optical Materials in July.

Note: Why isn't the major media reporting this exciting development? For more on this, see concise summaries of deeply revealing new energy inventions news articles from reliable major media sources. Explore a treasure trove of concise summaries of incredibly inspiring news articles which will inspire you to make a difference.

In a nation thirsting for energy, he loomed like a messiah: a small-town engineer who claimed he could run a car on water. The assertion — based on the premise that he had discovered a way to easily split the oxygen and hydrogen atoms in water molecules with almost no energy — would, if proven, represent a stunning breakthrough for physics and a near-magical solution to Pakistan’s desperate power crisis. “By the grace of Allah, I have managed to make a formula that converts less voltage into more energy,” the professed inventor, Agha Waqar Ahmad, said in a telephone interview. “This invention will solve our country’s energy crisis and provide jobs to hundreds of thousands of people.” Established scientists have debunked his spectacular claims, first made one month ago, saying they violate ironclad laws of physics. The quest to harness chemical energy from water is a holy grail of science, offering the tantalizing promise of a world free from dependence on oil. Groups in other countries, including Japan, the United States and Sri Lanka, have previously made similar claims. They have been largely ignored. Not so with Mr. Ahmad, even if he is an unlikely scientific prodigy. He graduated with a degree in mechanical engineering in 1990 from a small technical college in Khairpur, in southern Sindh Province, he said in the interview. For most of his career he worked in a local police department. He is currently unemployed. But he sprang up at a moment when Pakistan was intensely aware of its power shortcomings.

Note: For deeply revealing reports from reliable major media sources on new energy inventions, click here.

A revolutionary device that can harness energy from slow-moving rivers and ocean currents could provide enough power for the entire world, scientists claim. The technology can generate electricity in water flowing at a rate of less than one knot - about one mile an hour - meaning it could operate on most waterways and sea beds around the globe. Existing technologies which use water power, relying on the action of waves, tides or faster currents created by dams, are far more limited in where they can be used, and also cause greater obstructions when they are built in rivers or the sea. Turbines and water mills need an average current of five or six knots to operate efficiently, while most of the earth's currents are slower than three knots. The new device, which has been inspired by the way fish swim, consists of a system of cylinders positioned [horizontally] to the water flow and attached to springs. As water flows past, the cylinder creates vortices, which push and pull the cylinder up and down. The mechanical energy in the vibrations is then converted into electricity. The scientists behind the technology, which has been developed in research funded by the US government, say ... the technology would require up to 50 times less ocean acreage than wave power generation. The system, conceived by scientists at the University of Michigan, is called Vivace, or "vortex-induced vibrations for aquatic clean energy".

Note: For lots more on new energy technology developments, click here.

An airplane-inspired car that costs $10,000 less than a basic Volvo and gets 300 miles per gallon? Not quite yet, but San Diego robot-builder Steve Fambro may be onto something with the Aptera ("wingless" in Greek) vehicle. Fambro was inspired to build the vehicle when his wife deemed a kit airplane he was building was too dangerous. The vehicle pictured was designed by Jason Hill and his firm "11" for Fambro. The three-wheeled, 1,500-pound prototype has 2 1/2 seats, and when the vehicle goes into production in October, Fambro expects that it will have an acceleration rate of zero to 60 mph in 11 seconds (a second slower than the Prius) and retail for less than $30,000. The Aptera will come in two versions: an all-electric that is expected to go 120 miles on a charge and a hybrid that will have a 600-mile range on a full charge and full tank. Unlike other three-wheeled cars that are technically motorcycles (thus skirting a lot of safety criteria), the Aptera's airplane-wide wheel base makes it stable. The fiberglass shell is reinforced with steel and aluminum, and there will be air bags in the seat belts. What's not to like, unless, of course, you're the passenger in the half seat.

Note: For a fascinating video clip of this car on a local ABC news affiliate, click here. Why aren't other major media picking up this exciting story?

It's a two-hour ferry ride to the Danish island of Samso. To visit Samso is to see the future. Samso is an area about 40 square miles long with a permanent population of about 4,000 — all of them living a green dream. Take farmer Erik Andersen. His tractor runs on oil from rape seed, which he grows. His hot water and power come from his solar panels or wind turbines. There's not a fossil fuel in sight. "It's a very good feeling because the island is a renewable energy island," Anderson says. Ten years ago, Andersen and the people of Samso accepted a challenge from Denmark's government: Could they run their farms; could they power their businesses; could they lead their lives in an entirely energy self-sufficient and carbon-neutral way? Now they have the answer. They can. "Because it's a good idea for the environment," Andersen explains. To harness the wind, of which they have plenty, they built wind turbines. To provide heat, they burn locally grown straw in central plants that produce super hot water and pump it through underground pipes into peoples' homes. It's not only more efficient than running individual furnaces, it's carbon neutral. The net greenhouse gas emissions from these plants? Zero. It's a system that just recycles itself, says Jens Peter Nielson with the Samso Energy Authority. Even after a freezing cold night, the days short and cloudy, the solar-heated hot water is still hot. The Samso scheme has become so successful that the island has installed a string of turbines offshore to make surplus power to sell to the mainland.

Note: For further inspiring examples of developments in new energy technologies, click here.

A Florida man with no medical training has invented a machine that he believes may lead to a cure for cancer. John Kanzius ... wondered if his background in physics and radio could come in handy in treating the disease from which he suffers himself. After 24 rounds of chemotherapy, the former broadcaster decided that he did not want to see others suffer trying to cure the disease. Kanzius said it was watching kids being treated that affected him the most. "Particularly, young children walk in with smiles, and then you'd see them three weeks later and their smiles had disappeared. I said to myself, 'We're in a barbaric type of medicine." Kanzius said his machine basically makes cells act like antennae to pick up a signal and self-destruct. Unlike current cancer treatment, Kanzius' machine does not use radiation, and unlike today's radio-frequency treatments, it's noninvasive. Now, some of the nation's most prominent doctors and scientists are using Kanzius' machines in their research. In January, researchers said they performed a breakthrough at the M. D. Anderson Cancer Center in Houston. "The complete killing of pancreatic cells in laboratory conditions is encouraging," Dr. Steve Curley said. Kanzius explained that his machine uses a solution filled with nanoparticles, which measure no more than one-billionth of a meter. A test subject would be injected with either gold or carbon nanoparticles, which would make their way through the body and attach to the cancerous cells. The test subject would then enter the machine and receive a dose of radio frequency waves, theoretically heating and killing the cancerous cells in moments and leaving nearby cells untouched.

Note: For more on this exciting machine and the man behind it, click here. For other major media articles relating potential cancer cures, click here.

Important Note: Explore our full index to revealing excerpts of key major media news articles on several dozen engaging topics. And don't miss amazing excerpts from 20 of the most revealing news articles ever published.